Sectional Scaffold
Frames, walkboards, leveling jacks, cross braces, rolling towers, access systems, stair towers and more. All your scaffolding needs from one place. Bil-Jax®, the original yellow scaffold manufacturer.
-
Replacement Parts for Scaffold
Scaffold replacement parts including clamps, hooks, brace slides & rivets, leveling nuts, screws, & U-bolts.Half Outrigger Clamp, Putlog Clamp Hook, Gooser Brace Slide, Leveling Nut, Set Screw, Lever Tail Nut 5" Long , Brace Rivet with 3 Washers, U-bolt only - Putlong Angle Hanger, Thumb Screw -
Canopy Top – Weather Protection
Attach the Canopy Top to scaffolding for weather protection. Fits any 5' frame & adjusts up to 10'.The Canopy Top is used along the top of a scaffold set-up to hold weather protection material in place. It fits on top of any 5' frame. Brackets to hold 2 x 4 wood have been welded to the outside leg. Weather Protection Clips can also be used. Clips are made of sturdy PVC plastic and snap firmly into place to hold plastic weather material to scaffold. -
Knock-Down Frame
Modular scaffolding knock-down frame features a slim design that fits through spaces as small as 13" wide for access to restricted openings.- Knock-down frames fit through a 13″ diameter opening.
- Available with: J-Lock, C-Lock, and T-Lock
- Frame Sides and Extenders sold separately.
-
Brackets & Clamps
Wide variety of brackets & clamps for scaffolding. Clamps & brackets for notched & hole braces, parallel tube clamps, B-lock clamps.Various clamps to be used for scaffolding -
Pedestal Scaffold Frame
Pedestal scaffold frame features a higher level for use as a material shelf & a lower level for a walkboard. Ideal for single-story brickwork.- Walkboard level height adjusts from 24″ to 48″.
-
Outriggers
Triangular outrigger brackets increase scaffolding base width & provide stability. Use with casters or leveling jacks.- Used to increase the base width
- Increase the stability of the tower
- Can be used with casters or leveling jacks
-
Drop Forged Clamps
Complex drop forged steel clamps precisely engineered to hold scaffolding tubes together safely & efficiently. Rigid & swivel styles available.- Clamps that are used to hold scaffolding tubes together
- Offered in both rigid and swivel
-
Tube-N-Clamp Components
This scaffolding system uses vertical & horizontal steel clamps connected with right angle clamps. Assemble yourself for versatility.Components used to build Tube-N-Clamp scaffolding -
Sidewalk Frame
Sturdy steel sidewalk frame supports plywood & other protective coverings to shield passersby from falling debris.- Furnished with hex nut lock standard
- Can be ordered with inserts attached
-
Panel Guard System
A complete safety solution that includes a top rail, mid-rail & toeboard. Installs quickly & easily.- Easy and quick to install
- Panels include top rail, mid-rail and toeboard
- Hinge pins are recommended to prevent uplift
- Easi-Guard and Panel-Guard components are not interchangeable.
-
Putlog Accessories
Accessories help simplify mounting putlogs. Angle hangers, saddles, spreaders & putlog support with clamps. -
Putlogs
Putlogs secure scaffolding directly to a wall in light duty applications. Standard & trussed putlogs are available.- Only to be used for light duty applications
- Spans over a larger area
- Putlogs are used as a low cost alternative for larger platforms or bridging obstructions
-
Easi-Guard Panel System
Easi-Guard Panel System assembles quickly & easily to provide safety on scaffold platforms. Includes top rail & chained mid-rail.- Easy and quick to install
- End panels use steel tubular top rail with chained mid-rail for easy platform entry
- End panels include built in 6" steel toeboard
- End panel toeboard adjusts to accomodate various deck styles
- Easi-Guard and Panel-Guard components are not interchangeable.
-
“R” Ladder Frame
"R" ladder center access frames are built with rungs spaced 12" apart instead of 15" for easier climbing up the scaffold.- Normal 5×5 frame rung spacing is over 15”
- Shown with T-Lock
- Can be ordered with inserts attached
-
Swing Gates
Swing gates for Open End frames allow workers to move between scaffold sections & provide a guard rail for safety.- Used specifically for Open End Frames
- Allows workers to move between scaffold sections
- Provides a guard rail between scaffold sections
-
Scaffold Tie Brace
Adjustable scaffold tie braces secure scaffolding to a wall & may be used in place of outriggers when safe.- Adjusts from 4″ – 32″ from scaffold structure
-
Lateral Braces
Lateral braces are used with cat-a-corner braces to provide extra support. Connect perpendicularly at the base to keep scaffolding squared.- Needed every 20’ in height
-
“L” Ladder Scaffolding Frame
"L" ladder frames consist of steel beams conjoined into a single unit as a ladder-like structure for climbing up scaffolding. Can be ordered with inserts attached.- Narrow frames traditionally called 28″ wide can vary from 25 11⁄16″ – 31 11⁄16″
- Exact overall measurements are needed when ordering 28″ wide frames
- Shown with J-Lock
- Can be ordered with inserts attached
-
TUF-N-LITE Hinged Ladder Board
Our popular Tuf-N-Lite aluminum & plywood walkboard with a hinged hatch for internal access. Great for working in tight or hard to reach areas.- The Tuf-N-Lite Walkboard with an access hatch
- Hinged hatch allows for internal access
-
Steel Walkboard
Steel walkboards offer strength & durability for heavy loads. Available in 7', 8', & 10' lengths.Available in 7', 8', and 10' lengths. This product offers users the highest possible product quality & durability with the least possible maintenance. -
Steel Toeboards
Toeboards prevent tools & other objects from falling from scaffolding decks & causing injury to people below.- Provides safety to the scaffolding platforms
- Must be used on all scaffolds in compliance with local, state, and federal regulations
-
Open Ladder Frames
Open ladder frames feature a ladder-like structure on one side & a walk-through opening on the other. Climb up or walk the length of scaffolding.- Shown with C-Lock
- Can be ordered with inserts attached
-
Hoist Arm and Well Wheel
Swivel head hoist arm & well wheel provides an easy way to lift loads up to 100 lbs. to the top of the scaffolding structure.- Used to hoist tools up to workers
-
Cat-A-Corner Braces
Cat-a-corner braces connect diagonally at the scaffold base to provide strength & extra stability.- Needed every 20’ in height
-
X-PANDED Steel Walkboard
Galvanized steel walkboard is durable and corrosion-resistant. Expanded metal surface provides extra room.- All Galvanized Steel Construction
- Expanded Metal Surface Area
- Two Scaffold Hooks At Each End
- Heavy Duty Construction
-
Intermediate Guard Rails
Intermediate guard rails attach to open end scaffold frames to ensure worker safety. Side & end panels available.- Used for Open End Frames
- Side and end panels available
-
Fastening Pins
Fastening pins secure the insert to the scaffolding frame for strength & stability.Fastening pins secure the insert to the frame. Note: The Rivet and Cotter Pin, Drive Pin and Spring Rivet are used for loss prevention only. Use Gravity Pig Tail, Hinge Pin and Snap Pin to prevent uplifting. -
Double Step Frames
Double step frames consist of steel beams conjoined into a single unit with a ladder-like structure on both sides. Allows workers to climb up scaffolding.- Shown with C-Lock
- Can be ordered with inserts attached
-
Climbing Ladder
Climbing ladders attach to the outside of scaffolding frames & offer 12" step spacing for easy access.- Climbing ladders offer 12" step spacing for scaffold access
- Easily attaches to the outside of frames
- Can be used with conventional guard railing, Panel Guard, or Easi-Guard
-
Arm Braces
Arm braces provide scaffolding access from the braced side. Available in hole end, notch end & trussed styles.- Braces available in “hole end”, “notch end”, or “trussed” types
- End type to coordinate with your lock type
-
X-TRU-LITE Walkboard
Lightweight, stable, secure extruded all-aluminum decking with an interlocking 3-hook design & a non-slip grip for safety.Bil-Jax 7100 series walkboard features a 3-hook, deck interlock design with grooved aluminum decking for a non-slip grip. -
Scaffold Guard Rails
Galvanized tubing guard rails attach to scaffolding to ensure worker safety. Compatible with B, F, or U lock guard rail posts.- Galvanized tubing that attaches to scaffolding for safety
- Use with B, F, or U Lock Guard Rail Posts
-
Safety Documents
Scaffolding safety documents include safety tips, OSHA regulations, safety video, decals, cards & more.- Tips on Scaffold Safety / Safety Rule
- OSHA Safety and Health Regulations for Construction
- Recommended Scaffold Erection Procedures
- Caution Envelope with Wire
- Scaffold Safety Packet (includes: LL-204-01, LL-204-02, LL-204-03, LL-204-04, LL-204-11)
- Instructions for Erecting Rolling Towers
- Commitment to Safety Package (includes: 1 scaffold safety video, 20 frame decals, 25 LL-204-05 scaffold safety packets, 1 laminated certificate)
- Scaffold Check Guide Cards
-
Open End Frames
Open end frames are conjoined into a single unit with a walk-through opening for easy access across the entire length of scaffolding.- Shown with Open Cane
- Shown with C-Lock
- Can be ordered with inserts attached
-
Insert Attachments
Factory installed insert attachments for scaffold frames. Rivet & cotter, spring rivet, drive pin.- Factory installed insert attachments
- A charge per frame to have these installed
- 2 attachments required per frame
-
End Brackets
End brackets attach to the end of scaffolding so platforms can be run parallel to frames, adding additional work space & adjustable height.- Adds adjustable work height
- Easy to set up and take down
- Add additional work space