Sectional Scaffold
Frames, walkboards, leveling jacks, cross braces, rolling towers, access systems, stair towers and more. All your scaffolding needs from one place. Bil-Jax®, the original yellow scaffold manufacturer.
-
Replacement Parts for Scaffold
Scaffold replacement parts including clamps, hooks, brace slides & rivets, leveling nuts, screws, & U-bolts.Half Outrigger Clamp, Putlog Clamp Hook, Gooser Brace Slide, Leveling Nut, Set Screw, Lever Tail Nut 5" Long , Brace Rivet with 3 Washers, U-bolt only - Putlong Angle Hanger, Thumb Screw -
Canopy Top – Weather Protection
Attach the Canopy Top to scaffolding for weather protection. Fits any 5' frame & adjusts up to 10'.The Canopy Top is used along the top of a scaffold set-up to hold weather protection material in place. It fits on top of any 5' frame. Brackets to hold 2 x 4 wood have been welded to the outside leg. Weather Protection Clips can also be used. Clips are made of sturdy PVC plastic and snap firmly into place to hold plastic weather material to scaffold. -
Knock-Down Frame
Modular scaffolding knock-down frame features a slim design that fits through spaces as small as 13" wide for access to restricted openings.- Knock-down frames fit through a 13″ diameter opening.
- Available with: J-Lock, C-Lock, and T-Lock
- Frame Sides and Extenders sold separately.
-
Brackets & Clamps
Wide variety of brackets & clamps for scaffolding. Clamps & brackets for notched & hole braces, parallel tube clamps, B-lock clamps.Various clamps to be used for scaffolding -
Pedestal Scaffold Frame
Pedestal scaffold frame features a higher level for use as a material shelf & a lower level for a walkboard. Ideal for single-story brickwork.- Walkboard level height adjusts from 24″ to 48″.
-
Outriggers
Triangular outrigger brackets increase scaffolding base width & provide stability. Use with casters or leveling jacks.- Used to increase the base width
- Increase the stability of the tower
- Can be used with casters or leveling jacks
-
Drop Forged Clamps
Complex drop forged steel clamps precisely engineered to hold scaffolding tubes together safely & efficiently. Rigid & swivel styles available.- Clamps that are used to hold scaffolding tubes together
- Offered in both rigid and swivel
-
Tube-N-Clamp Components
This scaffolding system uses vertical & horizontal steel clamps connected with right angle clamps. Assemble yourself for versatility.Components used to build Tube-N-Clamp scaffolding -
Sidewalk Frame
Sturdy steel sidewalk frame supports plywood & other protective coverings to shield passersby from falling debris.- Furnished with hex nut lock standard
- Can be ordered with inserts attached
-
Panel Guard System
A complete safety solution that includes a top rail, mid-rail & toeboard. Installs quickly & easily.- Easy and quick to install
- Panels include top rail, mid-rail and toeboard
- Hinge pins are recommended to prevent uplift
- Easi-Guard and Panel-Guard components are not interchangeable.
-
Putlog Accessories
Accessories help simplify mounting putlogs. Angle hangers, saddles, spreaders & putlog support with clamps. -
Putlogs
Putlogs secure scaffolding directly to a wall in light duty applications. Standard & trussed putlogs are available.- Only to be used for light duty applications
- Spans over a larger area
- Putlogs are used as a low cost alternative for larger platforms or bridging obstructions
-
Easi-Guard Panel System
Easi-Guard Panel System assembles quickly & easily to provide safety on scaffold platforms. Includes top rail & chained mid-rail.- Easy and quick to install
- End panels use steel tubular top rail with chained mid-rail for easy platform entry
- End panels include built in 6" steel toeboard
- End panel toeboard adjusts to accomodate various deck styles
- Easi-Guard and Panel-Guard components are not interchangeable.
-
“R” Ladder Frame
"R" ladder center access frames are built with rungs spaced 12" apart instead of 15" for easier climbing up the scaffold.- Normal 5×5 frame rung spacing is over 15”
- Shown with T-Lock
- Can be ordered with inserts attached
-
Swing Gates
Swing gates for Open End frames allow workers to move between scaffold sections & provide a guard rail for safety.- Used specifically for Open End Frames
- Allows workers to move between scaffold sections
- Provides a guard rail between scaffold sections
-
Scaffold Tie Brace
Adjustable scaffold tie braces secure scaffolding to a wall & may be used in place of outriggers when safe.- Adjusts from 4″ – 32″ from scaffold structure
-
Lateral Braces
Lateral braces are used with cat-a-corner braces to provide extra support. Connect perpendicularly at the base to keep scaffolding squared.- Needed every 20’ in height
-
“L” Ladder Scaffolding Frame
"L" ladder frames consist of steel beams conjoined into a single unit as a ladder-like structure for climbing up scaffolding. Can be ordered with inserts attached.- Narrow frames traditionally called 28″ wide can vary from 25 11⁄16″ – 31 11⁄16″
- Exact overall measurements are needed when ordering 28″ wide frames
- Shown with J-Lock
- Can be ordered with inserts attached
-
TUF-N-LITE Hinged Ladder Board
Our popular Tuf-N-Lite aluminum & plywood walkboard with a hinged hatch for internal access. Great for working in tight or hard to reach areas.- The Tuf-N-Lite Walkboard with an access hatch
- Hinged hatch allows for internal access
-
Steel Walkboard
Steel walkboards offer strength & durability for heavy loads. Available in 7', 8', & 10' lengths.Available in 7', 8', and 10' lengths. This product offers users the highest possible product quality & durability with the least possible maintenance. -
Steel Toeboards
Toeboards prevent tools & other objects from falling from scaffolding decks & causing injury to people below.- Provides safety to the scaffolding platforms
- Must be used on all scaffolds in compliance with local, state, and federal regulations
-
Open Ladder Frames
Open ladder frames feature a ladder-like structure on one side & a walk-through opening on the other. Climb up or walk the length of scaffolding.- Shown with C-Lock
- Can be ordered with inserts attached
-
Hoist Arm and Well Wheel
Swivel head hoist arm & well wheel provides an easy way to lift loads up to 100 lbs. to the top of the scaffolding structure.- Used to hoist tools up to workers
-
Cat-A-Corner Braces
Cat-a-corner braces connect diagonally at the scaffold base to provide strength & extra stability.- Needed every 20’ in height