- Shown with C-Lock
- Can be ordered with inserts attached
Scaffold
-
Step Frames
Step frames with ladder-type rungs & an open space let you climb up scaffolding or create an adjustable makeshift workbench. -
Inline Side Brackets
Inline side brackets add adjustable work space & provide scaffolding access next to a building or wall. Easy to set up and take down.- Adds adjustable work height
- Easy to set up and take down
- Add additional work space
-
Ring Lock – Leveling Jack
Leveling jack for ring lock scaffolding with a steel rod & square base for stability. Set to custom heights on uneven surfaces.- Can be set to custom heights
-
Casters
Cast iron or plastic for non-marring, each caster features a 4” stem, 500 lb. load capacity, and 360° swivel.Casters are available in cast iron or plastic for non-marring. They are one of three base options for scaffold. Attached to the bottom of scaffold frames, casters are used to make units mobile for ease of job completion. -
Ring Lock – Planks
Steel plank for ring lock scaffolding is fixed on the ring lock ledger for workers to walk on. Available in raised or flush styles.- Available in raised or flush
-
Ring Lock – Vertical Diagonals
Vertical diagonal posts stabilize ring lock scaffolding. Features the connecting portion of the rosette joint design.- Featuring the connecting portion of the rosette joint design
- Stabilizes the verticals and Ring Lock scaffolding
-
Ring Lock – Spigot Clamp
Spigot clamp for ring lock scaffolding clamps onto trusses to hold verticals in place.- Clamps on to trusses
- Holds verticals in place
-
Access Ladder System
Lightweight steel access ladder system provides access to platforms inside multi-level scaffolding units.- Allows worker access to platform inside of the scaffold unit
- Can be used on rolling or stationary towers
- Lightweight steel construction
- Ladder hooks to frame horizontal - rests on a walk-board
- Top hinge platform offered, allowing worker to have access through platform by hinging it out of the way. Platform hinges back into position to offer a full working deck
-
Base Plates/Rubber Pad
Base plates serve as scaffolding unit feet, preventing slipping & sinking. Includes rubber pad to prevent marring.- The “feet” to scaffolding units • Comes in both rigid and swivel configurations
- Rubber pad used to prevent maring of high end finished floors (hardwood, marble, etc.)
-
End Brackets
End brackets attach to the end of scaffolding so platforms can be run parallel to frames, adding additional work space & adjustable height.- Adds adjustable work height
- Easy to set up and take down
- Add additional work space
-
Open End Frames
Open end frames are conjoined into a single unit with a walk-through opening for easy access across the entire length of scaffolding.- Shown with Open Cane
- Shown with C-Lock
- Can be ordered with inserts attached
-
Pro-Jax Additional Height Packages
Add height to your Pro-Jax scaffolding unit with additional height packages.Adds height to the Pro-Jax unit -
Ring Lock – Stair Stringer with Channel
Stair stringers for ring lock scaffolding are the side pieces that make up the stair unit. Features a channel down the back.- Side pieces that make the stair unit
- Two stringers are needed to make a complete stair unit
- Features a channel down the back
-
Safety Documents
Scaffolding safety documents include safety tips, OSHA regulations, safety video, decals, cards & more.- Tips on Scaffold Safety / Safety Rule
- OSHA Safety and Health Regulations for Construction
- Recommended Scaffold Erection Procedures
- Caution Envelope with Wire
- Scaffold Safety Packet (includes: LL-204-01, LL-204-02, LL-204-03, LL-204-04, LL-204-11)
- Instructions for Erecting Rolling Towers
- Commitment to Safety Package (includes: 1 scaffold safety video, 20 frame decals, 25 LL-204-05 scaffold safety packets, 1 laminated certificate)
- Scaffold Check Guide Cards
-
Scaffold Guard Rails
Galvanized tubing guard rails attach to scaffolding to ensure worker safety. Compatible with B, F, or U lock guard rail posts.- Galvanized tubing that attaches to scaffolding for safety
- Use with B, F, or U Lock Guard Rail Posts
-
Shoring Posts – Electroplated
Electroplated steel shoring posts are easily adjustable & offer a strong, durable, corrosion-resistant solution for securing scaffolding.- Electroplated steel posts
- Easily adjustable
- Range of sizes available
-
X-TRU-LITE Walkboard
Lightweight, stable, secure extruded all-aluminum decking with an interlocking 3-hook design & a non-slip grip for safety.Bil-Jax 7100 series walkboard features a 3-hook, deck interlock design with grooved aluminum decking for a non-slip grip. -
Ring Lock – Stair Stringer
These Ring Lock Stringers are several pieces of steel conjoined together to form one side of a scaffolding stair unit.- Side pieces that make the stair unit
- Two stringers are needed to make a complete stair unit
-
Ring Lock – Stair Tread
Stair treads for ring lock scaffolding attach to stringers to form stairs. Raised holes provide traction.- The step piece that attaches to a stringer
- Raised holes for traction
-
Arm Braces
Arm braces provide scaffolding access from the braced side. Available in hole end, notch end & trussed styles.- Braces available in “hole end”, “notch end”, or “trussed” types
- End type to coordinate with your lock type
-
Climbing Ladder
Climbing ladders attach to the outside of scaffolding frames & offer 12" step spacing for easy access.- Climbing ladders offer 12" step spacing for scaffold access
- Easily attaches to the outside of frames
- Can be used with conventional guard railing, Panel Guard, or Easi-Guard
-
Double Step Frames
Double step frames consist of steel beams conjoined into a single unit with a ladder-like structure on both sides. Allows workers to climb up scaffolding.- Shown with C-Lock
- Can be ordered with inserts attached
-
End Guard Rail for Side Bracket
End guard rail is used with side brackets as a guar rail to ensure worker safety.- Used with side brackets as a guard rail