- The Tuf-N-Lite Walkboard with an access hatch
- Hinged hatch allows for internal access
Scaffold
-
TUF-N-LITE Hinged Ladder Board
Our popular Tuf-N-Lite aluminum & plywood walkboard with a hinged hatch for internal access. Great for working in tight or hard to reach areas. -
Ring Lock – Verticals
These Ring Lock Vertical posts are composed of a single rod of steel with the ring portion of the rosette design as well as steel inserts for connecting to other vertical posts.- Featuring a rosette joint design for multiple angles
- Inserts included
-
Ring Lock – Horizontals
These Ring Lock Horizontal posts are composed of a single rod of steel with the connecting portion of the rosette design.- Featuring the connecting portion of the rosette joint design
- Stabilizes the verticals
-
Insert Attachments
Factory installed insert attachments for scaffold frames. Rivet & cotter, spring rivet, drive pin.- Factory installed insert attachments
- A charge per frame to have these installed
- 2 attachments required per frame
-
Arm Braces
Arm braces provide scaffolding access from the braced side. Available in hole end, notch end & trussed styles.- Braces available in “hole end”, “notch end”, or “trussed” types
- End type to coordinate with your lock type
-
Ring Lock – Vertical Diagonals
Vertical diagonal posts stabilize ring lock scaffolding. Features the connecting portion of the rosette joint design.- Featuring the connecting portion of the rosette joint design
- Stabilizes the verticals and Ring Lock scaffolding
-
Fastening Pins
Fastening pins secure the insert to the scaffolding frame for strength & stability.Fastening pins secure the insert to the frame. Note: The Rivet and Cotter Pin, Drive Pin and Spring Rivet are used for loss prevention only. Use Gravity Pig Tail, Hinge Pin and Snap Pin to prevent uplifting. -
Ring Lock – Verticals without Inserts
Vertical posts for ring lock scaffolding consist of a steel rod with the ring portion of the rosette joint design. Ideal for structures with complicated shapes.- Featuring a rosette joint design for multiple angles
-
Ring Lock – Leveling Jack
Leveling jack for ring lock scaffolding with a steel rod & square base for stability. Set to custom heights on uneven surfaces.- Can be set to custom heights
-
Cat-A-Corner Braces
Cat-a-corner braces connect diagonally at the scaffold base to provide strength & extra stability.- Needed every 20’ in height
-
Ring Lock – Side Bracket
Side brackets for ring lock scaffolding are made of steel rods in a stabilized triangle. Features the connecting portion of the rosette joint design.- Featuring the connecting portion of the rosette joint design
-
Ring Lock – Spigot Clamp
Spigot clamp for ring lock scaffolding clamps onto trusses to hold verticals in place.- Clamps on to trusses
- Holds verticals in place
-
Ring Lock – Stair Stringer
These Ring Lock Stringers are several pieces of steel conjoined together to form one side of a scaffolding stair unit.- Side pieces that make the stair unit
- Two stringers are needed to make a complete stair unit
-
Ring Lock – Stair Tread
Stair treads for ring lock scaffolding attach to stringers to form stairs. Raised holes provide traction.- The step piece that attaches to a stringer
- Raised holes for traction
-
Ring Lock – Stair Stringer with Channel
Stair stringers for ring lock scaffolding are the side pieces that make up the stair unit. Features a channel down the back.- Side pieces that make the stair unit
- Two stringers are needed to make a complete stair unit
- Features a channel down the back
-
Ring Lock – Truss
Trusses for ring lock scaffolding stabilize the verticals & feature the connecting portion of the rosette joint design. Used to span over large areas.- Featuring the connecting portion of the rosette joint design
- Stabilizes the verticals
- Used to span over large areas and openings
- Can create temporary roof structures
-
Side Brackets
Side brackets extend scaffolding platform closer to building or wall for extra work space.Side Brackets or Saddle Hangers are built for Bil-Jax Scaffold Systems. Adjustable options as well as Tube or Plate end options are available. Standard tube size is 7. Made in the USA. Capacity 500 lb. All brackets should be pinned properly in place. -
End Brackets
End brackets attach to the end of scaffolding so platforms can be run parallel to frames, adding additional work space & adjustable height.- Adds adjustable work height
- Easy to set up and take down
- Add additional work space
-
End Guard Rail for Side Bracket
End guard rail is used with side brackets as a guar rail to ensure worker safety.- Used with side brackets as a guard rail
-
Lateral Braces
Lateral braces are used with cat-a-corner braces to provide extra support. Connect perpendicularly at the base to keep scaffolding squared.- Needed every 20’ in height
-
Hoist Arm and Well Wheel
Swivel head hoist arm & well wheel provides an easy way to lift loads up to 100 lbs. to the top of the scaffolding structure.- Used to hoist tools up to workers
-
Putlogs
Putlogs secure scaffolding directly to a wall in light duty applications. Standard & trussed putlogs are available.- Only to be used for light duty applications
- Spans over a larger area
- Putlogs are used as a low cost alternative for larger platforms or bridging obstructions
-
Leveling Jacks
Adjustable leveling jacks can be set to custom heights & provide a solid foundation for the scaffolding frame.Adjustable Leveling Jack is ideal for ensuring a solid foundation for a scaffolding frame, especially when it is assembled along an external wall. -
Base Plates/Rubber Pad
Base plates serve as scaffolding unit feet, preventing slipping & sinking. Includes rubber pad to prevent marring.- The “feet” to scaffolding units • Comes in both rigid and swivel configurations
- Rubber pad used to prevent maring of high end finished floors (hardwood, marble, etc.)