- Narrow frames traditionally called 28″ wide can vary from 25 11⁄16″ – 31 11⁄16″
- Exact overall measurements are needed when ordering 28″ wide frames
- Shown with J-Lock
- Can be ordered with inserts attached
Scaffold
Sectional Scaffold, Utility Scaffold, System Scaffold, and Shoring Scaffold. Everything you need from the original yellow scaffold company, Bil-Jax®.
-
“L” Ladder Scaffolding Frame
"L" ladder frames consist of steel beams conjoined into a single unit as a ladder-like structure for climbing up scaffolding. Can be ordered with inserts attached. -
“R” Ladder Frame
"R" ladder center access frames are built with rungs spaced 12" apart instead of 15" for easier climbing up the scaffold.- Normal 5×5 frame rung spacing is over 15”
- Shown with T-Lock
- Can be ordered with inserts attached
-
Access Ladder System
Lightweight steel access ladder system provides access to platforms inside multi-level scaffolding units.- Allows worker access to platform inside of the scaffold unit
- Can be used on rolling or stationary towers
- Lightweight steel construction
- Ladder hooks to frame horizontal - rests on a walk-board
- Top hinge platform offered, allowing worker to have access through platform by hinging it out of the way. Platform hinges back into position to offer a full working deck
-
Arm Braces
Arm braces provide scaffolding access from the braced side. Available in hole end, notch end & trussed styles.- Braces available in “hole end”, “notch end”, or “trussed” types
- End type to coordinate with your lock type
-
Base Plates/Rubber Pad
Base plates serve as scaffolding unit feet, preventing slipping & sinking. Includes rubber pad to prevent marring.- The “feet” to scaffolding units • Comes in both rigid and swivel configurations
- Rubber pad used to prevent maring of high end finished floors (hardwood, marble, etc.)
-
Brackets & Clamps
Wide variety of brackets & clamps for scaffolding. Clamps & brackets for notched & hole braces, parallel tube clamps, B-lock clamps.Various clamps to be used for scaffolding -
Canopy Top – Weather Protection
Attach the Canopy Top to scaffolding for weather protection. Fits any 5' frame & adjusts up to 10'.The Canopy Top is used along the top of a scaffold set-up to hold weather protection material in place. It fits on top of any 5' frame. Brackets to hold 2 x 4 wood have been welded to the outside leg. Weather Protection Clips can also be used. Clips are made of sturdy PVC plastic and snap firmly into place to hold plastic weather material to scaffold. -
Casters
Cast iron or plastic for non-marring, each caster features a 4” stem, 500 lb. load capacity, and 360° swivel.Casters are available in cast iron or plastic for non-marring. They are one of three base options for scaffold. Attached to the bottom of scaffold frames, casters are used to make units mobile for ease of job completion. -
Cat-A-Corner Braces
Cat-a-corner braces connect diagonally at the scaffold base to provide strength & extra stability.- Needed every 20’ in height
-
Climbing Ladder
Climbing ladders attach to the outside of scaffolding frames & offer 12" step spacing for easy access.- Climbing ladders offer 12" step spacing for scaffold access
- Easily attaches to the outside of frames
- Can be used with conventional guard railing, Panel Guard, or Easi-Guard
-
Diagonal Cross Braces
Diagonal cross braces offer rigid connections for scaffold frames. Manufactured from high quality steel for durability.- Braces available in “hole end” or “notch end” types
- End type to coordinate with your lock type
- Replace the 0010 with 0009 when ordering “notch end” braces
-
Double Step Frames
Double step frames consist of steel beams conjoined into a single unit with a ladder-like structure on both sides. Allows workers to climb up scaffolding.- Shown with C-Lock
- Can be ordered with inserts attached