- Used to increase the base width
- Increase the stability of the tower
- Can be used with casters or leveling jacks
Scaffold
-
Outriggers
Triangular outrigger brackets increase scaffolding base width & provide stability. Use with casters or leveling jacks. -
Swing Gates
Swing gates for Open End frames allow workers to move between scaffold sections & provide a guard rail for safety.- Used specifically for Open End Frames
- Allows workers to move between scaffold sections
- Provides a guard rail between scaffold sections
-
Intermediate Guard Rails
Intermediate guard rails attach to open end scaffold frames to ensure worker safety. Side & end panels available.- Used for Open End Frames
- Side and end panels available
-
Panel Guard System
A complete safety solution that includes a top rail, mid-rail & toeboard. Installs quickly & easily.- Easy and quick to install
- Panels include top rail, mid-rail and toeboard
- Hinge pins are recommended to prevent uplift
- Easi-Guard and Panel-Guard components are not interchangeable.
-
Replacement Parts for Scaffold
Scaffold replacement parts including clamps, hooks, brace slides & rivets, leveling nuts, screws, & U-bolts.Half Outrigger Clamp, Putlog Clamp Hook, Gooser Brace Slide, Leveling Nut, Set Screw, Lever Tail Nut 5" Long , Brace Rivet with 3 Washers, U-bolt only - Putlong Angle Hanger, Thumb Screw -
Brackets & Clamps
Wide variety of brackets & clamps for scaffolding. Clamps & brackets for notched & hole braces, parallel tube clamps, B-lock clamps.Various clamps to be used for scaffolding -
Drop Forged Clamps
Complex drop forged steel clamps precisely engineered to hold scaffolding tubes together safely & efficiently. Rigid & swivel styles available.- Clamps that are used to hold scaffolding tubes together
- Offered in both rigid and swivel
-
Putlog Accessories
Accessories help simplify mounting putlogs. Angle hangers, saddles, spreaders & putlog support with clamps. -
Steel Toeboards
Toeboards prevent tools & other objects from falling from scaffolding decks & causing injury to people below.- Provides safety to the scaffolding platforms
- Must be used on all scaffolds in compliance with local, state, and federal regulations
-
Scaffold Guard Rails
Galvanized tubing guard rails attach to scaffolding to ensure worker safety. Compatible with B, F, or U lock guard rail posts.- Galvanized tubing that attaches to scaffolding for safety
- Use with B, F, or U Lock Guard Rail Posts
-
Base Plates/Rubber Pad
Base plates serve as scaffolding unit feet, preventing slipping & sinking. Includes rubber pad to prevent marring.- The “feet” to scaffolding units • Comes in both rigid and swivel configurations
- Rubber pad used to prevent maring of high end finished floors (hardwood, marble, etc.)
-
Leveling Jacks
Adjustable leveling jacks can be set to custom heights & provide a solid foundation for the scaffolding frame.Adjustable Leveling Jack is ideal for ensuring a solid foundation for a scaffolding frame, especially when it is assembled along an external wall. -
Putlogs
Putlogs secure scaffolding directly to a wall in light duty applications. Standard & trussed putlogs are available.- Only to be used for light duty applications
- Spans over a larger area
- Putlogs are used as a low cost alternative for larger platforms or bridging obstructions
-
Hoist Arm and Well Wheel
Swivel head hoist arm & well wheel provides an easy way to lift loads up to 100 lbs. to the top of the scaffolding structure.- Used to hoist tools up to workers
-
End Guard Rail for Side Bracket
End guard rail is used with side brackets as a guar rail to ensure worker safety.- Used with side brackets as a guard rail
-
Lateral Braces
Lateral braces are used with cat-a-corner braces to provide extra support. Connect perpendicularly at the base to keep scaffolding squared.- Needed every 20’ in height
-
Cat-A-Corner Braces
Cat-a-corner braces connect diagonally at the scaffold base to provide strength & extra stability.- Needed every 20’ in height
-
End Brackets
End brackets attach to the end of scaffolding so platforms can be run parallel to frames, adding additional work space & adjustable height.- Adds adjustable work height
- Easy to set up and take down
- Add additional work space
-
Side Brackets
Side brackets extend scaffolding platform closer to building or wall for extra work space.Side Brackets or Saddle Hangers are built for Bil-Jax Scaffold Systems. Adjustable options as well as Tube or Plate end options are available. Standard tube size is 7. Made in the USA. Capacity 500 lb. All brackets should be pinned properly in place. -
Fastening Pins
Fastening pins secure the insert to the scaffolding frame for strength & stability.Fastening pins secure the insert to the frame. Note: The Rivet and Cotter Pin, Drive Pin and Spring Rivet are used for loss prevention only. Use Gravity Pig Tail, Hinge Pin and Snap Pin to prevent uplifting. -
Arm Braces
Arm braces provide scaffolding access from the braced side. Available in hole end, notch end & trussed styles.- Braces available in “hole end”, “notch end”, or “trussed” types
- End type to coordinate with your lock type
-
Insert Attachments
Factory installed insert attachments for scaffold frames. Rivet & cotter, spring rivet, drive pin.- Factory installed insert attachments
- A charge per frame to have these installed
- 2 attachments required per frame
-
TUF-N-LITE Hinged Ladder Board
Our popular Tuf-N-Lite aluminum & plywood walkboard with a hinged hatch for internal access. Great for working in tight or hard to reach areas.- The Tuf-N-Lite Walkboard with an access hatch
- Hinged hatch allows for internal access
-
Insert Pins
Size coded insert pins are available in three collar diameters or without a collar.Inserts are available in three diameters as illustrated in the product images. All inserts are size coded on the collar as either 5, 6 or 7. Inserts are not included with frames - they must be ordered as separate items. -
Access Ladder System
Lightweight steel access ladder system provides access to platforms inside multi-level scaffolding units.- Allows worker access to platform inside of the scaffold unit
- Can be used on rolling or stationary towers
- Lightweight steel construction
- Ladder hooks to frame horizontal - rests on a walk-board
- Top hinge platform offered, allowing worker to have access through platform by hinging it out of the way. Platform hinges back into position to offer a full working deck
-
Climbing Ladder
Climbing ladders attach to the outside of scaffolding frames & offer 12" step spacing for easy access.- Climbing ladders offer 12" step spacing for scaffold access
- Easily attaches to the outside of frames
- Can be used with conventional guard railing, Panel Guard, or Easi-Guard
-
Replacement Decals
Replacement decals for scaffolding components ensure safety compliance.- Panel Guard Warning Decal
- Caster Decal
- Leveling Caster/Leveling Jack Extension Decal
- Scaffold Frame Warning Decal
- Personnel Bracket Warning Decal
- Guard Railing Decal
- Walkboard/Catwalk Warning Decal (Tuf-N-Lite)
- Hoist Arm Warning Decal
- Expanded Metal Walkboard/Catwalk Decal
-
Safety Documents
Scaffolding safety documents include safety tips, OSHA regulations, safety video, decals, cards & more.- Tips on Scaffold Safety / Safety Rule
- OSHA Safety and Health Regulations for Construction
- Recommended Scaffold Erection Procedures
- Caution Envelope with Wire
- Scaffold Safety Packet (includes: LL-204-01, LL-204-02, LL-204-03, LL-204-04, LL-204-11)
- Instructions for Erecting Rolling Towers
- Commitment to Safety Package (includes: 1 scaffold safety video, 20 frame decals, 25 LL-204-05 scaffold safety packets, 1 laminated certificate)
- Scaffold Check Guide Cards
-
Rolling Tower Package
Rolling Tower Package features a sturdy rolling tower with large work platform, adjustable levels & easy access guard rail system for safety.Bil-Jax Rolling Tower Packages are manufactured from high strength steel tubing with coped and arc welded perimeter joints on all frames. The rolling towers offer a large work platform with adjustable platform levels and an easy access guard rail system. Standard 7 tube size. All standard components are quick and easy to assemble. -
Canopy Top – Weather Protection
Attach the Canopy Top to scaffolding for weather protection. Fits any 5' frame & adjusts up to 10'.The Canopy Top is used along the top of a scaffold set-up to hold weather protection material in place. It fits on top of any 5' frame. Brackets to hold 2 x 4 wood have been welded to the outside leg. Weather Protection Clips can also be used. Clips are made of sturdy PVC plastic and snap firmly into place to hold plastic weather material to scaffold. -
Knock-Down Frame
Modular scaffolding knock-down frame features a slim design that fits through spaces as small as 13" wide for access to restricted openings.- Knock-down frames fit through a 13″ diameter opening.
- Available with: J-Lock, C-Lock, and T-Lock
- Frame Sides and Extenders sold separately.
-
Double Step Frames
Double step frames consist of steel beams conjoined into a single unit with a ladder-like structure on both sides. Allows workers to climb up scaffolding.- Shown with C-Lock
- Can be ordered with inserts attached
-
Open Ladder Frames
Open ladder frames feature a ladder-like structure on one side & a walk-through opening on the other. Climb up or walk the length of scaffolding.- Shown with C-Lock
- Can be ordered with inserts attached
-
Pedestal Scaffold Frame
Pedestal scaffold frame features a higher level for use as a material shelf & a lower level for a walkboard. Ideal for single-story brickwork.- Walkboard level height adjusts from 24″ to 48″.
-
“R” Ladder Frame
"R" ladder center access frames are built with rungs spaced 12" apart instead of 15" for easier climbing up the scaffold.- Normal 5×5 frame rung spacing is over 15”
- Shown with T-Lock
- Can be ordered with inserts attached
-
Open End Frames
Open end frames are conjoined into a single unit with a walk-through opening for easy access across the entire length of scaffolding.- Shown with Open Cane
- Shown with C-Lock
- Can be ordered with inserts attached