Back to ARB Virtual Event View Cart: 0 items

Scaffold

Home » Scaffold

Scaffold

Sectional Scaffold, Utility Scaffold, System Scaffold, and Shoring Scaffold. Everything you need from the original yellow scaffold company, Bil-Jax®.

  • “L” Ladder Scaffolding Frame

    "L" ladder frames consist of steel beams conjoined into a single unit as a ladder-like structure for climbing up scaffolding. Can be ordered with inserts attached.
    • Narrow frames traditionally called 28″ wide can vary from 25 11⁄16″ – 31 11⁄16″
    • Exact overall measurements are needed when ordering 28″ wide frames
    • Shown with J-Lock
    • Can be ordered with inserts attached
  • “R” Ladder Frame

    "R" ladder center access frames are built with rungs spaced 12" apart instead of 15" for easier climbing up the scaffold.
    • Normal 5×5 frame rung spacing is over 15”
    • Shown with T-Lock
    • Can be ordered with inserts attached
  • Access Ladder System

    Lightweight steel access ladder system provides access to platforms inside multi-level scaffolding units.
    • Allows worker access to platform inside of the scaffold unit
    • Can be used on rolling or stationary towers
    • Lightweight steel construction
    • Ladder hooks to frame horizontal - rests on a walk-board
    • Top hinge platform offered, allowing worker to have access through platform by hinging it out of the way. Platform hinges back into position to offer a full working deck
  • Arm Braces

    Arm braces provide scaffolding access from the braced side. Available in hole end, notch end & trussed styles.
    • Braces available in “hole end”, “notch end”, or “trussed” types
    • End type to coordinate with your lock type
  • Base Plates/Rubber Pad

    Base plates serve as scaffolding unit feet, preventing slipping & sinking. Includes rubber pad to prevent marring.
    • The “feet” to scaffolding units • Comes in both rigid and swivel configurations
    • Rubber pad used to prevent maring of high end finished floors (hardwood, marble, etc.)
  • Brackets & Clamps

    Wide variety of brackets & clamps for scaffolding. Clamps & brackets for notched & hole braces, parallel tube clamps, B-lock clamps.
    Various clamps to be used for scaffolding
  • Canopy Top – Weather Protection

    Attach the Canopy Top to scaffolding for weather protection. Fits any 5' frame & adjusts up to 10'.
    The Canopy Top is used along the top of a scaffold set-up to hold weather protection material in place. It fits on top of any 5' frame. Brackets to hold 2 x 4 wood have been welded to the outside leg. Weather Protection Clips can also be used. Clips are made of sturdy PVC plastic and snap firmly into place to hold plastic weather material to scaffold.
  • Casters

    Cast iron or plastic for non-marring, each caster features a 4” stem, 500 lb. load capacity, and 360° swivel.
    Casters are available in cast iron or plastic for non-marring. They are one of three base options for scaffold. Attached to the bottom of scaffold frames, casters are used to make units mobile for ease of job completion.
  • Cat-A-Corner Braces

    Cat-a-corner braces connect diagonally at the scaffold base to provide strength & extra stability.
    • Needed every 20’ in height
  • Climbing Ladder

    Climbing ladders attach to the outside of scaffolding frames & offer 12" step spacing for easy access.
    • Climbing ladders offer 12" step spacing for scaffold access
    • Easily attaches to the outside of frames
    • Can be used with conventional guard railing, Panel Guard, or Easi-Guard
  • Diagonal Cross Braces

    Diagonal cross braces offer rigid connections for scaffold frames. Manufactured from high quality steel for durability.
    • Braces available in “hole end” or “notch end” types
    • End type to coordinate with your lock type
    • Replace the 0010 with 0009 when ordering “notch end” braces
  • Double Step Frames

    Double step frames consist of steel beams conjoined into a single unit with a ladder-like structure on both sides. Allows workers to climb up scaffolding.
    • Shown with C-Lock
    • Can be ordered with inserts attached
  • Drop Forged Clamps

    Complex drop forged steel clamps precisely engineered to hold scaffolding tubes together safely & efficiently. Rigid & swivel styles available.
    • Clamps that are used to hold scaffolding tubes together
    • Offered in both rigid and swivel
  • Easi-Guard Panel System

    Easi-Guard Panel System assembles quickly & easily to provide safety on scaffold platforms. Includes top rail & chained mid-rail.
    • Easy and quick to install
    • End panels use steel tubular top rail with chained mid-rail for easy platform entry
    • End panels include built in 6" steel toeboard
    • End panel toeboard adjusts to accomodate various deck styles
    • Easi-Guard and Panel-Guard components are not interchangeable.
  • End Brackets

    End brackets attach to the end of scaffolding so platforms can be run parallel to frames, adding additional work space & adjustable height.
    • Adds adjustable work height
    • Easy to set up and take down
    • Add additional work space
  • End Guard Rail for Side Bracket

    End guard rail is used with side brackets as a guar rail to ensure worker safety.
    • Used with side brackets as a guard rail
  • EZ-RAX

    Scaffold transport system includes trailer, rolling tower scaffold, & storage rack with tool box/straps. Easy setup and teardown.
    EZ-RAX is the industry’s first and only scaffold transport system. From transport to storage to inventory management, Bil-Jax’s patented engineering solution virtually eliminates all the scaffold rental hassles for both retailers and their customers. Every aspect of the scaffold rental is easier, faster, and more convenient. The EZ-RAX scaffold trailer is designed for use with our popular 5’ x 7’  high rolling tower scaffold. Every part and component is held within one integrated storage racking system. For the customer renting the scaffold, that means easier setup and teardown, as well as simpler inventory assessment to ensure all parts are in place and ready for return. For the retailer, it means consistent compact storage capabilities when the scaffold is not being rented, as well as simple single unit mobility when it comes to loading, unloading, drop off, and delivery. Along with the entire scaffold system and rolling tower, the storage rack includes a small tool box, straps to help secure all parts and forklift slots for easy transport. Eliminate the hassles of a bulky rental scaffolding system and take the EZ-RAX route today. Holds every part and component of a 20′, 15', and 10' high rolling tower scaffold in one integrated racking system Helps ensure that every part and component is included — and returned when rented Currently available with or without the Bil-Jax rolling tower
  • Fastening Pins

    Fastening pins secure the insert to the scaffolding frame for strength & stability.
    Fastening pins secure the insert to the frame. Note: The Rivet and Cotter Pin, Drive Pin and Spring Rivet are used for loss prevention only. Use Gravity Pig Tail, Hinge Pin and Snap Pin to prevent uplifting.
  • Guard Rail Posts

    Guard rail posts secure conventional guard rail systems to ensure safety & comply with local, state & federal regulations.
    • Conventional guard rail system
    • Must be used with toeboards, on all scaffolds, in compliance with local, state and federal regulations
  • Heavy Duty Shoring Posts

    Galvanized heavy duty steel posts are made for jobs requiring extra strength and durability and are rated up to 6,000 lbs. (5,000 lbs. if height exceeds 10’). They are easily adjustable and available in a range of sizes.
    • Galvanized heavy duty steel posts
    • Easily adjustable
    • Range of sizes available
  • Heavy Duty Stair Tower

    Heavy duty stair tower package provides 100' access & includes all components for complete scaffold assembly.
    Bil-Jax offers a heavy duty stair scaffolding system for worker access to buildings, bridges, observation towers, or renovation done inside or outside. The stairs can also be used for access in a scaffold set-up. Stair Tower Packages include frames, braces, leveling jacks, stair sections with handrails, stair rests, full top platform and top panel guard.
  • Hoist Arm and Well Wheel

    Swivel head hoist arm & well wheel provides an easy way to lift loads up to 100 lbs. to the top of the scaffolding structure.
    • Used to hoist tools up to workers
  • Inline Side Brackets

    Inline side brackets add adjustable work space & provide scaffolding access next to a building or wall. Easy to set up and take down.
    • Adds adjustable work height
    • Easy to set up and take down
    • Add additional work space
  • Insert Attachments

    Factory installed insert attachments for scaffold frames. Rivet & cotter, spring rivet, drive pin.
    • Factory installed insert attachments
    • A charge per frame to have these installed
    • 2 attachments required per frame
  • Insert Pins

    Size coded insert pins are available in three collar diameters or without a collar.
    Inserts are available in three diameters as illustrated in the product images. All inserts are size coded on the collar as either 5, 6 or 7. Inserts are not included with frames - they must be ordered as separate items.
  • Inspection Tags

    Worker safety scaffold inspection tags with Danger and Completed inserts, English
    Scaffold inspection safety tags with plastic holders. With Danger and Completed tag inserts, English. Additional safety material, Scaffold Replacement Decals
    • Plastic tag holder
    • Scaffold Completed tag insert
    • Scaffold Incomplete tag insert
    • Scaffold Released for Access tag insert
  • Intermediate Guard Rails

    Intermediate guard rails attach to open end scaffold frames to ensure worker safety. Side & end panels available.
    • Used for Open End Frames
    • Side and end panels available
  • Knock-Down Frame

    Modular scaffolding knock-down frame features a slim design that fits through spaces as small as 13" wide for access to restricted openings.
    • Knock-down frames fit through a 13″ diameter opening.
    • Available with: J-Lock, C-Lock, and T-Lock
    • Frame Sides and Extenders sold separately.
  • Lateral Braces

    Lateral braces are used with cat-a-corner braces to provide extra support. Connect perpendicularly at the base to keep scaffolding squared.
    • Needed every 20’ in height
  • Leveling Jacks

    Adjustable leveling jacks can be set to custom heights & provide a solid foundation for the scaffolding frame.
    Adjustable Leveling Jack is ideal for ensuring a solid foundation for a scaffolding frame, especially when it is assembled along an external wall.
  • Open End Frames

    Open end frames are conjoined into a single unit with a walk-through opening for easy access across the entire length of scaffolding.
    • Shown with Open Cane
    • Shown with C-Lock
    • Can be ordered with inserts attached
  • Open Ladder Frames

    Open ladder frames feature a ladder-like structure on one side & a walk-through opening on the other. Climb up or walk the length of scaffolding.
    • Shown with C-Lock
    • Can be ordered with inserts attached
  • Original Multipurpose

    Mobile scaffolding unit fits through doorways & adjusts up to 17' to reach high spaces. Removable casters for uneven surfaces.
    • Mobile scaffolding unit
    • Fits through doorways
  • Outriggers

    Triangular outrigger brackets increase scaffolding base width & provide stability. Use with casters or leveling jacks.
    • Used to increase the base width
    • Increase the stability of the tower
    • Can be used with casters or leveling jacks
  • Panel Guard System

    A complete safety solution that includes a top rail, mid-rail & toeboard. Installs quickly & easily.
    • Easy and quick to install
    • Panels include top rail, mid-rail and toeboard
    • Hinge pins are recommended to prevent uplift
    • Easi-Guard and Panel-Guard components are not interchangeable.
  • Pedestal Scaffold Frame

    Pedestal scaffold frame features a higher level for use as a material shelf & a lower level for a walkboard. Ideal for single-story brickwork.
    • Walkboard level height adjusts from 24″ to 48″.